Video Creator’s Channel Potent Printables

Which Three-Deep Entered You By Whats The Best

three pen well It all depends on who you’re buying for. For example, think about these two cases are you buying the pen for a young adult who’s never used a 3d pen before, but may grow into more advanced use of the pen or are you buying the pen for a young child or safety is a key concern because those two people have very different needs and should end up with two very different 3d pens. In this video I’m going to help you break down the most important features based on who you’re buying the pen for and I want to highlight the features and options you should be paying attention to when shopping it’s a bit of a teaser. Here are some buying guides that I put together for you, which should make your research a bit easier. also made some lists of current three pens on the market, comparing a whole range of factors such as speed, settings, temperature controls, and of course cost, and just to be clear.

I Was Sent.

Some of these pens free of charge to evaluating tests. I was sure to know which ones in these lists. So I’ll talk more about all these shopping aids later in the video. If you do end up buying a pen be sure to check out my tutorial series on how to use it.

I Have Tutorials Ranging From The Absolute

beginner to advanced users. I’ll put links to those at the end of the video and in the video description. Ok. So I came up with three major groups that I felt would be buying or using a 3d pen. These groups are young and casual adult users high end users and young children.

• pen
• pens
• 3d
• shopping
• tips

Ages 6 And Up So For

young and casual adult users. I thought the important factors for this groups are the ability to grow into a pen if desired. Do you be able to use a wide variety of plastics also called filament and being able to get up and running quickly and easily for high end users. This group will want all the bells and whistles like full control over temperature settings, specific extrude button setup and controls as many speed settings as possible, and the ability to use a wide variety of filaments for young children. Some of the chief factors to consider when buying our safety ease-of-use getting up and running quickly and easily and whether the pen has an internal battery or not before I go into detail for each group.

I Want To Say A Word About Cost

and 3d pens cost is one of the biggest factors for most people at this time. I’m seeing low-cost pens flooding the market. This makes it difficult to test out every pen on the market. But if I educate you on the right features to look for hopefully you’ll be more successful in your three been shopping for cost. I again stress taking into account who the pen is for the pen is going to be used infrequently.

Then You Can Find Lower-Cost Pens

that will serve this need. But you can also find dirt cheap pens that will work for about five minutes and then break so low-cost buyer beware. If you think this may be a hobby that will stick or you want to maximize the chances of a child having a good experience and spending a little more money may be. Go okay, let’s look at each of the different groups in detail. The first group is pretty broad and covers young adults and casual adult users Here, we want to strike a balance between you ease of use versus having room to grow their skills with a pen.

If They Want Fewer Controls And Settings

will keep the learning process simpler. So I recommend pens with just a few speed settings two or three seems to be a good number for people just learning. Another important item is to make sure that you get a pen that can use both UK and Abs plastic. This really opens up the options for the types and colors of filament. You can use with the pen.

It Definitely Gives The Owner Of Room

to grow with it. I also highly recommend using UK Filament / AbS because AbS has some health risks of. Long-term exposure Abs can be used, but proper precautions need to be taken. If you search UK or Google. You can find suggestions on exactly what precautions you need to take.

Ive Generally Seen Three Ways.

The temperature settings are dealt with. The first is a fixed single temperature setting meaning there’s no adjustment at all you just turn the pen on heats up to a fixed temperature. This is often done in the cheapest pens and is often only for UK filament so be sure to watch out for this pens usually clearly call out whether they work for multiple so there’s no mention they probably only work for one type. The second is fixed dual temperature settings.

These Usually Have Abs And Uk

temperature settings that you can toggle between the final method is complete control over temperature settings. These usually have a digital display and you can. The temperature value in one degree increments that you want the pen to heat up to finally it’s really nice if a pen comes with good instructions. Some UK filament and some templates to get started with. This is especially key for people brand new to 3d pens in the list I mentioned above included a room to grow category, which basically includes some of the 3d pens for high-end users.

If You Think The Person Youre Buying For

may want to grow into an advanced user or is able to navigate the additional features with no trouble. These might be some good pens for them. Let’s now move on and talk about those high-end 3d pens in detail frequent and high end users will want full temperature control over their pens. They wanted to in the exact temperature. They’re using for each filament to minimize the weeping and leakage.

Pen During Use A Subtle Point For High-End

users that are discovered when testing all these pens is the implementation and control of the extrude button I found. This is typically done in two ways. Some pens make you click the extrude button once, which locks the pen in extrude mode and then you click the button again to stop the extrusion on the plastic other pens allow you to press and hold these true but n’ and release it when you want to stop extruding the click to lock in place makes it really hard to do short bursts of extrusion and make small or fine features. The hold and release setup is much better for this advanced users also want as many speed settings as possible because this gives them the maximum flexibility and control when creating a model finally keep in mind that being able to use. 1.

75 Millimeter Diameter Filament Is A Big Advantage.

Most 3d printers use this diameter filament so that means there’s a huge selection of filament available, which is key now. We can talk about the final group of three deep end users young children. This is the category I have the least experience with as I haven’t personally used any 3d pens specifically designed for small children, but I will take you through the process. I would use based on my experience.

Our Gonna Buy A Pen For

a small child that experience does include having two young children. My own I’m going to talk about three three pen models which I believe have been specifically designed for young children. These are the Mint 3d Junior, the 3d Simo basic and the 3doodler Star. Other 3d pens just throw children into their literature, but that doesn’t mean they’re truly safe for. Kids I’ll compare and contrast these three pens with ones from the other groups, so you understand why I focus on them.

So Safety Has To Be The

number one factor here. 3d pens can have a hot tips, which are pushing out molten plastic that can burn you. If a kid gets burned that they’re probably not gonna have had a fun time. I’d be looking at pens that have specific safety features meant to prevent this these pens use a different type of plastic that melts at a lower temperature. This greatly reduces the chance of a child being burned when using these pens, which is great.

In Addition, This Plastic Is Billed

as non-toxic in case of accidental consumption, but keep in mind the special plastics limit where you can buy them and you most likely will only be able to get them from one source and. pay more for it so just make sure you’re comfortable with this prior to buying anything. The next most important factors are ease of use and getting up and running quickly that means fewer buttons and less functionality on the pattern. Many pens have five or six buttons on it, which is just too complicated. I would not buy one of these for young child.

These Kid.

Specific pens have anywhere from one to three buttons. That kind of simplicity will make it nice and easy to get going quickly. Finally, these three pens have internal batteries. The reason this is important is that other 3D pen models require the use of a power cable or external battery pack.

This Drags On The Top Of

the pen and can disrupt what you’re creating it does take some practice and time used to having the internal battery makes these much closer. to a normal pen, which means it’s easier for a young child to adapt to using it. Before a close of this video. I want to talk more about the shopping aids that I made for you links to everything I show can be found in the video description.

The First Aids Are Made Are

these checklists. I broke these out into the three different groups, so you can print out the specific group you’re shopping for these let you compare three pens and reminds you of the important features to look for next are the spreadsheets I made which will allow you to compare the various 3d pen models on the market today. I looked at all the factors that I’ve been talking about in this video. things such as speed settings, whether it has an internal battery or not what materials can be used with each pen and so on again broke them down into the different groups that I’ve talked about in this video.

• features based buying pen want
• compare various 3d pen models
• advanced use pen buying
• 3d pens cost biggest factors
• 3d pens list mentioned included

But I Also Included The Full List Of

pens that are available. If you want to look at that there is an instructions tab in the spreadsheet so be sure to look at that first. Oh that was a lot of material to cover. I hope you found it useful and that it helps guide your search to buy the best 3d pen links to most of the PEns are available in the video description so check out the ones that interest you and remember.

I Also Have General Three Pen

tutorials to help people get started and steadily improve their skills. I’m always releasing more of my own 3d pen. creations as well as additional tutorial videos, so please subscribe if you want to see any of that thanks for watching and I’ll see you in the next video you.

Summary

Young and casual adult users and young children will be buying or using a 3d pen . This group will want all the bells and whistles like full control over temperature settings, temperature controls, and of course cost . Safety is a key concern for these groups and the ability to grow into a pen if desired . The ability to use a wide variety of plastics also called filament and being able to get up and running quickly and easily for high end users are the key factors for this group . Check out my tutorials ranging from the absolute beginner to advanced users. I’ll put links to those at the end of the video and in the video description.& I was sent. Some of these pens free of charge to evaluate tests. I was sure to know which ones in these lists.& So I’ll talk more about all these shopping aids later in this video. I’m sure to be sure to include some of these ones in this article.& If you do end up buying a pen be sure…. Click here to read more and watch the full video